Aller au contenu principal

Modifications apportées à l'étape #6

Modifié par Phillip Takahashi

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Dip a clean gloved finger into a bottle of new oil and spread the oil onto the gasket of the new oil filter.
[* icon_note] Wipe off any excess oil from your hands/fingers when you are done as the oil may make handling the filter or tools difficult.
[* black] Guide the oil filter back over the engine's oil filter threads and turn the filter clockwise until it is snug.
[* icon_caution] If the filter is difficult to turn at the beginning of its threads, stop! You may be cross threading the oil filter. Re-align the oil filter and try again.
[* icon_caution] Do not over-tighten your oil filter by using a wrenchfilter. Doing so may cause the oil filter seal to leak and will make removing the oil filter very difficult in the future.
[* icon_caution] Do not over-tighten your oil filter by using a wrenchfilter. Doing so may cause the oil filter seal to leak and will make removing the oil filter very difficult in the future.
[* black] Remove the oil drain pan from under the car.