Modifications apportées à l'étape #8
Lignes de l'étape
| - | [* black] Lift up on the T-handle to take pressure off the rod |
|---|---|
| - | [* black] Loosen and remove the rod |
| + | [* black] Lift up on the T-handle to take pressure off the rod clamp. |
| + | [* black] Loosen and remove the rod clamp. |
| [* black] Gently lower the T-handle. | |
| [* black] Repeat steps 18 through 23 until you reach the pump cylinder. | |
| - | [* icon_note] The pump cylinder will not fit through the |
| + | [* icon_note] The pump cylinder will not fit through the base clamp, but should be visible through the base clamp. |