Aller au contenu principal

Modifications apportées à l'étape #22

Modifié par Kyle Wiens

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Insert wisdom hereAttach the other end of your new cable to the logic board where the optical drive was connected.
[* black] Carefully wrap up the extra cable and store it to the side of the hard drive.
[* icon_reminder] You may want to use cable ties to bundle the excess cable tightly. If you don't stow the cable correctly, it will prevent the case from going back on all the way
.
[* black] Insert wisdom hereAttach the other end of your new cable to the logic board where the optical drive was connected.
[* black] Carefully wrap up the extra cable and store it to the side of the hard drive.
[* icon_reminder] You may want to use cable ties to bundle the excess cable tightly. If you don't stow the cable correctly, it will prevent the case from going back on all the way
.

Image 1

Ancienne version

Nouvelle version