Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Kyle

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* red] Using the [product|IF145-021|Phillips #1 Screwdriver], unscrew the 2 thick screws (length - 7.69mm) located on both sides of the stereo.
[* black] Remove side-metal plates gently.
[* black] Use the [product|IF145-005|Phillips #0 Screwdriverproduct|IF145-013|Heavy-duty Spudger], insert the flat end under each of the black flaps indicated in the picture. Use leverage to pry and pop them loose.
[* black] Use the [product|IF145-005|Phillips #0 Screwdriverproduct|IF145-013|Heavy-duty Spudger], insert the flat end under each of the black flaps indicated in the picture. Use leverage to pry and pop them loose.