Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #1

Modifié par Walter Galan

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* red] Remove the two Phillips screws securing the black antenna holder to the upper case.
[* black] Lift the black Bluetooth antenna holder off of the upper case.
[* black] Disconnect the Bluetooth antenna cable from the Bluetooth board.
[* black] Liftred] Remove the Bluetooth antenna out of its housing insingle Phillips screw securing the upper case. The Bluetooth antenna may be securedboard to the upperlower case with an adhesive, so rocking the antenna board from side to side may help it come free easier.
[* black] Liftred] Remove the Bluetooth antenna out of its housing insingle Phillips screw securing the upper case. The Bluetooth antenna may be securedboard to the upperlower case with an adhesive, so rocking the antenna board from side to side may help it come free easier.

Image 1

Ancienne version

Nouvelle version

Image 2

Ancienne version

Nouvelle version

Image 3

Supprimé