Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Phil Jones

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* blackred] Locate the two holes on the bottom of the monitor.
[* blackred] Locate the two holes on the bottom of the monitor.
[* black] Insert a prying tool into both holes and pry the plastic apart along the groove.
[* icon_note] This may be difficult to start. This task is much easier if two people pry simultaneously at each hole.
[* black] Continue prying along the entire edge of the monitor.