Aller au contenu principal

Modifications apportées à l'étape #6

Modifié par Keith

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Turn the monitor on its side so that the power supply and circuit board are facing to the right
[* black] Remove the two X.Xmm6.6mm screws located on the right and left side of the metal casing nearest to the power supplycasing. Use a Phillips #2 screwdriverscrewdriver to remove all four.
[* black] Remove the two X.Xmm6.6mm screws located on the right and left side of the metal casing nearest to the power supplycasing. Use a Phillips #2 screwdriverscrewdriver to remove all four.