Aller au contenu principal

Modifications apportées à l'étape #6

Modifié par Taylor Atterbury

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* blackred] Turn the monitor on its side so that the power supply and circuit board are facing to the right
[* blackred] Remove the two 6.6mm screws located on the right and left side of the metal casing. Use a Phillips #2 screwdriver to remove all four.
[* blackred] Turn the monitor on its side so that the power supply and circuit board are facing to the right
[* blackred] Remove the two 6.6mm screws located on the right and left side of the metal casing. Use a Phillips #2 screwdriver to remove all four.