Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Alex Do

Validation en attente

Supprimé
Ajouté
Inchangé

Lignes de l'étape

[* black] Turn the circuit board over and identify which solder connection you will desolder.
[* red] The solder connections shown in red hold the right antenna port in place. There is one more attachment for this antenna on the other side of the board.
[* blue] The solder connections shown in blue hold the left antenna port in place. Desolder these 4 points to remove the antenna port.
[* blue] The solder connections shown in blue hold the left antenna port in place. Desolder these 4 points to remove the antenna port.