Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Jim

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

-[* icon_reminder] Before disassembling your printer, be sure the ink has been removed and that the printer has been unplugged.
+[* icon_reminder] Before disassembling your printer, be sure that the printer has been unplugged.
[* black] Rotate the printer 90 degrees counter clockwise so that the side panel nest to the control panel is facing you.
[* red] Remove the two 2.74 mm Torx screws from the side panel.