Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par David Van Matre

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* icon_reminder] Before disassembling your printer, be sure that the printer has been unplugged.
-[* black] Rotate the printer 90 degrees counter clockwise so that the side panel nest to the control panel is facing you.
+[* black] Rotate the printer 90 degrees counter clockwise so that the side panel next to control panel is facing you.
[* red] Remove the two T10 Torx screws from the left side panel.