Aller au contenu principal

Modifications apportées à l'étape #9

Modifié par Miroslav Djuric

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Hold the logic board down with one hand and use your other hand to lift the left fan up from its housing. There is a piece of black tape securing the fan to the heat sink. Carefully peel this tape up from the heat sink as you lift the fan up.
-[* icon_note] Place the fan above the Airport card. It is not necessary to remove the fan from the computer entirely.
+[* black] Hold the logic board down with one hand and use your other hand to lift the left fan up from its housing. There is a piece of black tape securing the left fan to the heat sink. Carefully peel this tape up from the heat sink as you lift the left fan up.
+[* icon_note] Place the left fan above the Airport card. It is not necessary to remove the fan from the computer entirely.
[* black] Lift the right fan up and carefully peel up the tape securing the fan to the heat sink as you go.
[* black] Remove the right fan from the computer.