Aller au contenu principal

Modifications apportées à l'étape #9

Modifié par Jake Devincenzi

Validation en attente


Lignes de l'étape

[* black] Hold the logic board down with one hand and use your other hand to lift the left fan up from its housing. There is a piece of black tape securing the left fan to the heat sink. Carefully peel this tape up from the heat sink as you lift the left fan up.
[* icon_note] Place the left fan above the Airport card. It is not necessary to remove the fan from the computer entirely.
[* black] Lift the right fan up and carefully peel up the tape securing the fan to the heat sink as you go.
[* black] Remove the right fan from the computer.
+[* icon_note] If you leave the orange screws on, the heatsink/pipes come out effortlessly, still mounted onto the main board. That way the thermal connections are retained.