Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Jim

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Set aside the printer body.
[* red] Unscrew the 2.74 mm Torx screw.
[* black] Remove the plastic tab holding the glass in place.
[* violet] move lifiting glass to new step, and add pic of the tabs and what not.
[* icon_caution] Carefully lift the scanner glass panel above the plastic barrier and pull it towards the control panel circuitry. It can take quite a bit of force to get the panel to slide out. If not removed carefully, the scanner glass can shatter