Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par David Van Matre

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Set aside the printer body.
[* red] Unscrew the T10 1412 mm Torx screw.
[* red] Unscrew the T10 1412 mm Torx screw.
[* black] Remove the plastic tab holding the glass in place.
[* icon_caution] Carefully lift the scanner glass panel above the plastic barrier and pull it towards the control panel circuitry. It can take quite a bit of force to get the panel to slide out. If not removed carefully, the scanner glass can shatter