Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Johnathan Marroquin

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] Rotate the Printer 90 degrees counter clockwise.
-[* red] Remove the scanner cable from the logic board.
-[* icon_note] grasp the bottom of the cable and pull straight up. Do not wiggle it from side to side or twist it as this can damage the connection.
+[* red] Remove the scanner cable from the main circuit board.
+[* icon_note] Grasp the bottom of the cable and pull straight up. Do not wiggle it from side to side or twist it as this can damage the connection.