Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par Jim

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

+[* red] Remove the power button circuit board from the support frame by pinching the left side, pulling forward and to the left simultaneously.
+[* icon_caution] Be careful not to pull to hard on the cable connecting the power button circuit board to the logic board
+[* blue] Push up on the tab holding the secondary control circuit board and pull it forward to remove it.
+[* icon_caution] Be careful not to pull to hard on the cable connecting the secondary control circuit board to the logic board

Image 1

Aucune image précédente

Ajouté

Image 2

Aucune image précédente

Ajouté