Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #8

Modifié par Andrew Optimus Goldheart

Modification approuvée par Andrew Optimus Goldheart

Avant
Après
Inchangé

Lignes de l'étape

[* black] Hitting two birds with one stone, this connector handles both of the cables that run from motherboardTwo cables remain before we're able to separate the ~~ saucer section ~~ headband.
[*

[*
icon_note] While this shapeThis wide, reinforced connector makes us think [guide|10366|display cable|stepid=23135], there's a giant orange ribboncable|stepid=23135]—and we're not too far off, as this is the HDMI-in connector. Its cable is split in two and fed around the sides of the headband, clearly for this display. These guys are actually HDMIthat 50/50 side-to-side weight distribution.
[* black] WithThe second cable, a tiny 4-pin job, powers the connector...disconnectered,remaining LEDs, located on the scope is now separated fromback of the headband.
[* black] Hitting two birds with one stone, this connector handles both of the cables that run from motherboardTwo cables remain before we're able to separate the ~~ saucer section ~~ headband.
[*

[*
icon_note] While this shapeThis wide, reinforced connector makes us think [guide|10366|display cable|stepid=23135], there's a giant orange ribboncable|stepid=23135]—and we're not too far off, as this is the HDMI-in connector. Its cable is split in two and fed around the sides of the headband, clearly for this display. These guys are actually HDMIthat 50/50 side-to-side weight distribution.
[* black] WithThe second cable, a tiny 4-pin job, powers the connector...disconnectered,remaining LEDs, located on the scope is now separated fromback of the headband.