Modifications apportées à l'étape #2
Modifié par Dan Duchesne —
Modification approuvée par Dan Duchesne
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Wedge the flat end of the spudger between the connector and its socket |
|---|---|
| - | [* black] Twist back and forth in order to pry the connector loose from its socket |
| - | [* icon_note] Although you can pull on the connector wires to remove it from the socket, it is not recommended until the connector is loose to prevent damage to the wires |
| + | [* black] Wedge the flat end of the spudger between the connector and its socket. |
| + | [* black] Twist back and forth in order to pry the connector loose from its socket. |
| + | [* icon_note] Although you can pull on the connector wires to remove it from the socket, it is not recommended until the connector is loose to prevent damage to the wires. |