Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Modifications apportées à l'étape #8

Modifié par David Van Matre

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* icon_caution] Rotate the printer 180 degreesdegrees and turn it up on to the front side, so that the back of the printer is facing up and the bottom facing you. Be careful, the feed roller assembly is now only loosely connected to the printer base and it can easily slip or slide, damaging the printer.
[* icon_caution] Rotate the printer 180 degreesdegrees and turn it up on to the front side, so that the back of the printer is facing up and the bottom facing you. Be careful, the feed roller assembly is now only loosely connected to the printer base and it can easily slip or slide, damaging the printer.
[* red] Push in the tab on the left side of the back panel and pull outward to remove the back panel.