Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Taylor Nesheim

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[title] Step 1: Remove outer plastic housing
[title] Step 1: Remove outer plastic housing
[* black] Lift up the central plastic housing inside the scanner.
[* red] There are four plastic tabs located on the outer plastic housing. Push on each of these and pull to remove it.
[* black] Underneath you will see that the ribbon cable is attached to the circuit board.