Aller au contenu principal

Modifications apportées à l'étape #15

Modifié par Phillip Takahashi

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Insert the leads of the 1 µF capacitor through the holes indicated in step 9. The capacitor will have markings on it indicating its capacitance. The direction of the capacitor does not matter.
- [* icon_note] Be sure to route the leads so that they do not cover any needed holes from step 9 or 10. Also, do not allow the leads to contact the leads of other components.
+[* black] Insert the leads of the 1 µF capacitor through the holes indicated in step 7. The capacitor will have markings on it indicating its capacitance. The direction of the capacitor does not matter.
+ [* icon_note] Be sure to route the leads so that they do not cover any needed holes from step 7 or 8. Also, do not allow the leads to contact the leads of other components.
[* black] Solder the capacitor to the PCB and clip off the excess leads.