Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Megan Berthiaume

Modification approuvée par Megan Berthiaume

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Remove the four, 10 mm Phillips#1 screws from the black pipe. This allows for air to flow through the device to the battery to cool it, but it is in the way of removing the speaker.
+[* red] Remove the four, 10 mm Phillips#1 screws from the black pipe. This allows for air to flow through the device to the battery to cool it, but it is in the way of removing the speaker.
+[* black] Once the screws have been taken out just lift the pipe up and away from the device components.

Image 1

Ancienne version

Nouvelle version