Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Daniel Trudeau

Modification approuvée par Daniel Trudeau

Avant
Après
Inchangé

Lignes de l'étape

-[* yellow] Remove the 8 Phillips #0 screws from under the keyboard.
-[* red] Remove the two ribbon cables by using a spudger too push each end of the retention mechanism toward the ribbon cable being removed as in Step 6.
-[* red] Once the mechanism is released you may remove the cable by hand.
-[* black] The plastic cover can now be easily lifted and removed from the rest of the laptop.
+[* red] Remove the 8 Phillips #0 screws from under the keyboard.
+[* orange] Release the two ribbon cables from the ZIF connectors in the same fashion as in Step 7 with the black spudger.
+[* yellow] Once the mechanism is released you may remove the cable by hand.
+[* green] The plastic cover can now be easily lifted and removed from the rest of the laptop.

Image 1

Ancienne version

Nouvelle version

Image 2

Ancienne version

Nouvelle version