Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par aaa

Modification approuvée par aaa


Lignes de l'étape

[* black] Before we can reach the screen, we must remove the plate that holds the rest of the components.
[* red] To do so, locate and remove the (10) 3mm T4 Torx screws highlighted.
[* orange] There are also two ribbons connected the main device to the screen. To remove these, follow the ribbon to where they connect and use the spudger or a finger nail to lift the tab. Once open, gently pull the ribbon out.
-[* black] Once the screws and ribbons are removed, use the heavy duty spudger to gently remove the plate holding the rest of the components and set to the side.