Aller au contenu principal

Modifications apportées à l'étape #5

Modifié par aaa

Modification approuvée par aaa


Lignes de l'étape

+[* black] Once the screws and ribbons are removed, use the heavy duty spudger to gently remove the plate holding the rest of the components and set to the side.
[* red] Once the plate has been removed, located the (4) 3mm T4 Torx screws and remove them.
[* orange] There is a single ribbon here that has to be removed as well. Follow the ribbon to where it connects. Gently lift the tab using the spudger or a fingernail. Once the tab is open, gently pull the ribbon out and away.