Aller au contenu principal

Modifications apportées à l'étape #5

Modifié par Andrew Bookholt

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* icon_noteicon_caution] The logic board is still connected to the front case by the display ribbon cable, located on the headphone jack side of the logic board. When lifting
[* black] Lift
the logic board assembly out of the front case, do so as you would open a book by rotating the board about the display ribbon cable.
[* black] Lift the logic board
case from the click wheel connector side (the cable you just disconnected) and laydisconnected). Rotate the logic board assembly about the display ribbon cable and lay it next to the front case.
[* icon_noteicon_caution] The logic board is still connected to the front case by the display ribbon cable, located on the headphone jack side of the logic board. When lifting
[* black] Lift
the logic board assembly out of the front case, do so as you would open a book by rotating the board about the display ribbon cable.
[* black] Lift the logic board
case from the click wheel connector side (the cable you just disconnected) and laydisconnected). Rotate the logic board assembly about the display ribbon cable and lay it next to the front case.