Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Phillip Takahashi

Validation en attente

Supprimé
Ajouté
Inchangé

Lignes de l'étape

[* red] RemoveLoosen the 4 Torxfive #1 Phillips screws securing the heat sink.
[* icon_note] These screws are attached to the heat sink assembly.
[* red] RemoveLoosen the 4 Torxfive #1 Phillips screws securing the heat sink.
[* icon_note] These screws are attached to the heat sink assembly.
[* black] Gently lift the heat sink from side indicated in the picture.
[* icon_note] The heat sink may feel like it is glued to the chips because of the thermal paste. Gently wiggle the heat sink back and forth to help break it free.
[* icon_note] Be sure to thoroughly clean off the old thermal paste and apply new thermal paste before reinstalling the heat sink. Follow our [guide|744|thermal paste application guide] for detailed instructions.

Image 1

Ancienne version

Nouvelle version