Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Andrea

Modification approuvée par Andrea

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* red] Removeblack] Find the connection to LCD frompower board located on the top ofright hand corner. (The LCD power board (pinkwill be the long green circuit board with a pink and white cords) usingwire emerging from the top)
[* black] Using your blue
plastic opening tool.
[* blue] Remove
tool, remove the two 5mm screws withwire connections to the Phillips number 0.LCD power board located on the top of the board. (pink and white wires)
[* violet] Pick up the LCD power board, turn so you can see the bottom of it and remove the connection (multi-colored, twisted wire) to the Input/Output board.
[* red] Removeblack] Find the connection to LCD frompower board located on the top ofright hand corner. (The LCD power board (pinkwill be the long green circuit board with a pink and white cords) usingwire emerging from the top)
[* black] Using your blue
plastic opening tool.
[* blue] Remove
tool, remove the two 5mm screws withwire connections to the Phillips number 0.LCD power board located on the top of the board. (pink and white wires)
[* violet] Pick up the LCD power board, turn so you can see the bottom of it and remove the connection (multi-colored, twisted wire) to the Input/Output board.
[* black] Lift LCD power board from case.