Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Phillip Takahashi

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Locate the Bluetooth board. It is along the left edge of the iMac's case and just below the LED back light driver.
-[* black] Use a spudger to gently pry the antenna cable off of its socket.
- [* icon_caution] Do not pull the antenna by its cable as you may damage the antenna or its socket.
+[* red] The Bluetooth board is located along the left edge of the iMac's case and just below the LED back light driver.
+[* black] Use the flat end of a spudger to gently pry the antenna cable off of its socket.
+ [* icon_caution] Do not disconnect the antenna by pulling on its cable, as this may damage the antenna or its socket.