Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Carson Carroll

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* icon_caution] With the spudger, gently pry the back plate off the unit starting at the corners.
[* yellow] As you open the unit, locate the 8-pin white connector on the logic board and disconnectdisconnect it. The antenna side of the device should act like a hinge as you open it.
[* yellow] As you open the unit, locate the 8-pin white connector on the logic board and disconnectdisconnect it. The antenna side of the device should act like a hinge as you open it.
[* red] Open the device all the way, making sure to not disconnect the brown antenna wire.