Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #1

Modifié par Casey Sheehan —

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

-[* red] Remove the three wire connectors connecting broad to other boards.
-[* yellow] Remove the four 5mm screws using the Phillips #0 screwdriver.
-[* icon_note] One of the screws is hidden below the black tape. So gently pull that aside to get to it. Be sure to replace the tape when reinstalling the board.
+[* red] Use two blue plastic opening tools to remove the three wire connectors on the side of the input/output board.
+[* yellow] Use a Philips #0 screwdriver to remove the five screws on the board.
+[* icon_note] One of the screws is hidden below the black tape, so gently pull the tape to the side to gain access to it. Be sure to replace the tape when reinstalling the board.
[* black] Lift board from case.