Aller au contenu principal

Modifications apportées à l'étape #9

Modifié par Sterling Hirsh

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

-[* black] We lifted up the cover of the drive by removing the six PH #00 screws.
-[* black] Because of a secured wire leading to the drive, we reattached the cover to facilitate the remove of the entire drive assembly.
+[* red] We lifted up the cover of the optical drive by removing the six Phillips #00 screws. These are all labeled on the previous image.
+[* icon_caution] Because of a secured wire leading to the drive, we reattached the cover to facilitate the remove of the entire drive assembly without harming any of the electronics.
+[* black] There are a ton of parts in the optical drive, but there is nothing very fancy about this drive compared to other slot-loading drives, so I didn't take it apart completely. There are also a ton of gears and levers that I did not want to deal with.