Aller au contenu principal

Modifications apportées à l'étape #12

Modifié par Sterling Hirsh

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

-[* black] We begin to try to get to the logic board by removing this small black plastic rim.
-[* icon_note] Once within the case, all screws are Phillips #00.
+[* black] We begin trying to get to the logic board by removing this small black plastic rim.
+[* icon_note] Once within the case, all screws are Phillips #00. There are marked on the logic board with arrows, triangles, boxes, and crosses. From what I can tell, an arrow means that it just goes through the logic board cover. A triangle means that it is a longer logic board cover screw. A cross means that it holds on a plastic piece, and a box means that it holds on another EM shield / or heat sink.