Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par David Hodson

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* red] Use an open endopen-end wrench to loosen the 11 mm fitting where the brake hose attaches to the caliper.
[* red] Use an open endopen-end wrench to loosen the 11 mm fitting where the brake hose attaches to the caliper.
[* icon_note] Brake fluid will come out of the loosened brake hose. You should keep a bucket or pan nearby to collect it.
[* icon_caution] Be careful when handling brake fluid, as it may strip paint and dissolve some plastics.
[* black] Detach the brake hose and remove the brake caliper.
[* icon_reminder] When you install the new calipers you will need to bleed the brakes to remove any air from the brake fluid lines.