Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Scott Byer

Validation en attente


Lignes de l'étape

[* black] Locate the large button on the top back of the device. This button is used to release the latch holding the sliding back cover in place.
[* black] Press this button at the top while making a firm grip on the battery cover.
[* black] As the button is pressed, move the cover towards the bottom of the device while applying moderate pressure to the cover.
[* black] Be careful to not press down too hard on the battery cover as it is made of plastic.