Modifications apportées à l'étape #8
Lignes de l'étape
| - | [* black] The LED is connected to a pin |
|---|---|
| + | [* black] The LED is connected to a pin that is connected to the circuit board. |
| [* red] Upon close inspection, you can see that the LED's two ends are bent (red circle of the second image) to prevent it from slipping off of the pin. | |
| [* black] Use blunt tweezers to bend and straighten the two ends. | |
| [* black] Once the two ends are straight, gently pull the LED out of the pin. |