Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #2

Modifié par John P Loughran —

Modification approuvée par John P Loughran

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Using a tool with a head like a flat-head screwdriver (we used 3.5 mm flat-head) insert the flat-head into one of the small indentations located on the back of the speaker, either the one farthest to the right or left.
-[* black] Pry up with the flat-head so that the cover gets pushed up slightly.
+[* black] Using a tool such as a spudger or plastic opening tool, insert the end into one of the small indentations located on the back of the speaker. Start either on the indentation farthest to the right or to the left.
+[* black] Pry up with the spudger or plastic opening tool so that the cover is pushed up slightly.