Aller au contenu principal

Fix Your Stuff

Right to Repair

Parts & Tools

Modifications apportées à l'étape #4

Modifié par Thomas Sullivan

Modification approuvée par Thomas Sullivan


Lignes de l'étape

[* red] Remove the ribbon strip by pulling on it. This will remove the connection.
[* orange] Push down on the three wires and the clip will disconnect from the motherboard.
[* icon_reminder] During reassembly, remove the black tape on the ribbon cable, turn the camera upside down so you can see the port, and reinsert the cable with tweezers. It's a lot easier!

Image 1

Aucune image précédente