Modifications apportées à l'étape #4
Modifié par spslizer —
Modification approuvée par Reed Crosby
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* red] Using tweezers, remove the ribbon strip by pulling on it. This will remove the connection. |
| [* orange] Push down on the three wires with the metal spudger and the clip will disconnect from the motherboard. |
| [* icon_caution] The clip must be pulled '''up and away''' from the motherboard. Attempting to slide it out will damage the clip. |
| [* icon_reminder] During reassembly, remove the black tape on the ribbon cable, turn the camera upside down so you can see the port, and reinsert the cable with tweezers. It's a lot easier! |