Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Scott Byer

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] After Back cover is taken off and this panel is exposed please locateIn the first picture, a connection may be seen with the black cable connecting the external antenna pictured bottom right cornerconnector to the internal logic board (PCB) via U.FL connectors. The connectors on the ends of the cable are circled in red.
[* black] In the second picture, a connection may be seen with the with the grey cable connecting the external antenna connector tot he internal logic board (PCB) via U.FL connectors. The connectors on the ends of the cable are circled in red.
[* black] After Back cover is taken off and this panel is exposed please locateIn the first picture, a connection may be seen with the black cable connecting the external antenna pictured bottom right cornerconnector to the internal logic board (PCB) via U.FL connectors. The connectors on the ends of the cable are circled in red.
[* black] In the second picture, a connection may be seen with the with the grey cable connecting the external antenna connector tot he internal logic board (PCB) via U.FL connectors. The connectors on the ends of the cable are circled in red.

Image 1

Ancienne version

Nouvelle version

Image 2

Aucune image précédente

Ajouté(e)