Modifications apportées à cette étape
Modifié par Mani Jaishanker —
Modification approuvée par Mani Jaishanker
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Follow the [guide|84972|Teardown] guide up to Step 6 |
|---|---|
| [* black] Unscrew the marked screws with a Bit Driver with a 4 mm Nut Driver and a PH1 extender. | |
| [* black] Gently remove the circuit board. Make sure to untangle all the wires. | |
| [* black] For the replacement, follow steps 1, 2, and 3. | |
| [* black] For a complete reassembly, follow the [guide|84972|Teardown] guide in reverse from step 6. |