Modifications apportées à l'étape #2
Modifié par Mani Jaishanker —
Modification approuvée par Mani Jaishanker
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* red] Identify the circuit board. |
|---|---|
| + | [* yellow] Unscrew the marked screws with a bit driver with a 4 mm nut driver and a PH1 extender. |
| + | [* black] Gently remove the circuit board. Make sure to untangle all the wires. |
| + | [* black] For the replacement, follow steps 1, 2, and 3. |