Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #1

Modifié par Nick

Modification approuvée par Nick

Avant
Après
Inchangé

Lignes de l'étape

[title] Remove the chassis screws
[* black] To remove the hard drive from the computer, remove the two screws holding it in. Use the '''Phillips #1''' bit to do this.
[* icon_caution] The second screw, marked in orange is directly screwed into the chassis. DO NOT tightenovertighten this very far when reassembling, asscrew. If you do this, the clip will break here. It isn't the end of the world ifin this happens, butarea and you will need to replace it to ensureit, since there are only 2 screws that hold the hard drive doesn't fall out, should you lose the other screwin.
[* icon_caution] The second screw, marked in orange is directly screwed into the chassis. DO NOT tightenovertighten this very far when reassembling, asscrew. If you do this, the clip will break here. It isn't the end of the world ifin this happens, butarea and you will need to replace it to ensureit, since there are only 2 screws that hold the hard drive doesn't fall out, should you lose the other screwin.

Image 1

Aucune image précédente

Ajouté

Image 2

Aucune image précédente

Ajouté

Image 3

Aucune image précédente

Ajouté