Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #1

Modifié par Nick

Modification approuvée par Nick

Avant
Après
Inchangé

Lignes de l'étape

[title] Remove the chassis screws
[* black] To remove the hard drive from the computer, remove the two screws holding it in. Use the '''Phillips #1''' bit to do this.
[* icon_caution] The second screw,screw marked in orange is directly screwed into the chassis. DO NOT overtighten'''If this screw. If you do thisscrew is overtightened, the hard drive clip will break in this area and you will need to replace it, since there are only 2 screws that hold the hard drive in.be replaced.'''
[* icon_caution] The second screw,screw marked in orange is directly screwed into the chassis. DO NOT overtighten'''If this screw. If you do thisscrew is overtightened, the hard drive clip will break in this area and you will need to replace it, since there are only 2 screws that hold the hard drive in.be replaced.'''