Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #2

Modifié par Nick

Modification approuvée par Nick

Avant
Après
Inchangé

Lignes de l'étape

[title] Remove the drive clip
[* black] To remove the drive clip, remove the one screw from the left side that holds the drive in. To removeUse a '''Phillips #0''' bit for this step.
[* black] Once
the clipscrew is removed, pull itthe clip off from thisthe left side and it will come loseof the drive clip.
[* icon_note] The otherright side of the clip is held in with a pinused for alignment, so you do not have to worry about getting this wrong when reassembling the system. This pindrive alignment. Because of this, there is marked in orangeno screw on the right side of the drive clip.
[* black] To remove the drive clip, remove the one screw from the left side that holds the drive in. To removeUse a '''Phillips #0''' bit for this step.
[* black] Once
the clipscrew is removed, pull itthe clip off from thisthe left side and it will come loseof the drive clip.
[* icon_note] The otherright side of the clip is held in with a pinused for alignment, so you do not have to worry about getting this wrong when reassembling the system. This pindrive alignment. Because of this, there is marked in orangeno screw on the right side of the drive clip.