Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #3

Modifié par Nick

Modification approuvée par Nick

Avant
Après
Inchangé

Lignes de l'étape

[title] Remove the rubber bumpers
[* icon_reminder] These bumpers are held in with double sided tape. The tape will likely lose it's stickiness after one use, but it is not required to secure the drive bumpers.
[*
black] Once the drive is removed andfrom the drive clip is unscrewedclip, remove the rubber bumpers from the drivebumpers. To do this, pull them off of the drive as shownshown in the guide pictures. Transfer these to the new hard drive you are installing in the system.
[* icon_note] These
bumpers are held in with double sided tape. The tape will usually withstand 1-3 uses. After this you will need to either replace the tape on the drive bumpers or buy new onesyour replacement drive.
[* icon_reminder] These bumpers are held in with double sided tape. The tape will likely lose it's stickiness after one use, but it is not required to secure the drive bumpers.
[*
black] Once the drive is removed andfrom the drive clip is unscrewedclip, remove the rubber bumpers from the drivebumpers. To do this, pull them off of the drive as shownshown in the guide pictures. Transfer these to the new hard drive you are installing in the system.
[* icon_note] These
bumpers are held in with double sided tape. The tape will usually withstand 1-3 uses. After this you will need to either replace the tape on the drive bumpers or buy new onesyour replacement drive.