Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #5

Modifié par Adam O'Camb

Modification approuvée par Adam O'Camb

Avant
Après
Inchangé

Lignes de l'étape

[title] Re-Assembly
[* blackicon_note] The side of the retainer that has two different raised surfaces.
[* black] The raised
a ridged surface as shown is the part that needs to face down in the final assemblywatch.
[* black] The raised surfaceretainer sits in the groove around the outside will sit withininside of the metal bezel as shown in the image. Take notice of the orientation of the retainer in the image. The retainer should sit well without forceseat in the groove on the bezelbezel without applying force.
[* blackicon_note] The side of the retainer that has two different raised surfaces.
[* black] The raised
a ridged surface as shown is the part that needs to face down in the final assemblywatch.
[* black] The raised surfaceretainer sits in the groove around the outside will sit withininside of the metal bezel as shown in the image. Take notice of the orientation of the retainer in the image. The retainer should sit well without forceseat in the groove on the bezelbezel without applying force.