Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #6

Modifié par Adam O'Camb

Modification approuvée par Adam O'Camb

Avant
Après
Inchangé

Lignes de l'étape

[title] Re-Assembly (Continued)
[* black] Once you have the retainer seated in the bezel, place the bezel face down on your watch face placing the side with the split ofin the retainer touching down first. If you do not do this, youthe retainer may end up withnot seat properly, as shown in the problem pictured.first photo.
[* black]
If that happens, gently pry the bezel and retainer up by hand, re-seat the retainer in the bezel, and try again.
[* black] Once you have the retainer seated in the bezel, place the bezel face down on your watch face placing the side with the split ofin the retainer touching down first. If you do not do this, youthe retainer may end up withnot seat properly, as shown in the problem pictured.first photo.
[* black]
If that happens, gently pry the bezel and retainer up by hand, re-seat the retainer in the bezel, and try again.
[* black] Once you have successfully replaced your bezel on the watch, it should feel like new and rotate freely again.