Modifications apportées à l'étape #4
Modifié par Reed Crosby —
Modification approuvée par Reed Crosby
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] After removing the panel, locate two green circuit boards affixed to a larger blue circuit board. |
|---|---|
| - | [* black] Ignore the circuit board with the wires attached. |
| - | [* black] Look for the silver tabs on either side of the white plastic holding the RAM in place. |
| - | [* black] Using your index fingers, lift both tabs. The RAM should "pop" out. |
| + | [* red] After removing the panel, locate the memory modules. |
| + | [* black] Look for the silver tabs on either side of the white plastic holding the RAM in place. Then gently remove the RAM. |